|
|
Post by Thunder Valley Promotions on Mar 10, 2014 21:46:58 GMT -6
Full size, Mini, Stock, & Open
Race Starts at 7:30pm
Inspection: 3:30pm - 6:30pm
Full-size payout: 1st - $1300, 2nd - $900, 3rd - $600, 4th - $300, 5th - $150
Mini payout: 1st - $400, 2nd - $200, and 3rd - $100
Stock Heat: 1st - $1000, 2nd - $200, 3rd - $100
Open Heat 1st - $1000, 2nd - $, 3rd - $
|
|
|
|
Post by the911car on Jun 11, 2014 12:17:40 GMT -6
Where can I sign up and pay for entry?
|
|
|
|
Post by tbrell on Jun 17, 2014 20:56:27 GMT -6
Where can I sign up and pay for entry? I think you can pay day of, but it's more expensive than if you sign up at the drivers meeting in March... |
|
|
|
Post by the911car on Jul 10, 2014 3:33:53 GMT -6
Thanks brother
|
|
|
|
Post by the911car on Jul 10, 2014 4:13:16 GMT -6
[br In the stock class, the rules say,"you may use a steel bumper", " and make brackets ", Are there any restrictions, ? And what are they? ( I'm running a 2002 crown Vic and would like to know of I'm allowed a different bumper) thanks |
|
|
|
Post by the911car on Jul 10, 2014 4:16:29 GMT -6
[br In the stock class, the rules say,"you may use a steel bumper", " and make brackets ", Are there any restrictions, ? And what are they? ( I'm running a 2002 crown Vic and would like to know of I'm allowed a different bumper) thanks |
|
|
|
Post by tbrell on Jul 11, 2014 11:46:02 GMT -6
I'm not sure on the stock rules, BUT you must be a Monroe County resident to run stock class, I hope you are aware of that. The other classes are open to anyone.
I think you are reading the wrong section of the rules for stock, these are the two rules for stock class bumpers. It says nothing about making brackets...
BUMPERS ALL JUDGES DECISIONS ARE FINAL
1. You may weld on a steel bumper, no welding further than 4 inches from the back of bumper, single pass only.
2. Shocks may be collapsed and welded, single pass only or you may chain, one piece of chain per side BOLTED from the mount to mount to hold on the bumper.
|
|
|
|
Post by Thunder Valley Promotions on Jul 11, 2014 15:21:53 GMT -6
[br In the stock class, the rules say,"you may use a steel bumper", " and make brackets ", Are there any restrictions, ? And what are they? ( I'm running a 2002 crown Vic and would like to know of I'm allowed a different bumper) thanks BUMPERS 1. You may weld on a steel bumper, no welding further than 4 inches from the back of bumper, single pass only. 2. Shocks may be collapsed and welded, single pass only or you may chain, one piece of chain per side BOLTED from the mount to mount to hold on the bumper. Can not make brackets. Must bolt on or single pass weld only. |
|
